Neunaber Immerse Reverberator Mk II *Free Shipping in the USA*
Eight Stellar Stereo Reverbs — Zero Learning Curve
The Immerse Mk II raises the bar with eight rich stereo reverbs in one easy to use pedal. No user manual required. Experience studio-quality tone that can be used with instruments of all stripes.
High-quality buffered bypass, perfect for placing at the end of the signal chain
Trails switch
Kill Dry switch for parallel effect loops
Inputs/outputs can be used mono (#1) or stereo (#1 and #2)
Analog dry signal for low noise and zero latency
Small, pedalboard-friendly footprint
Requires standard 9V pedal power supply (not included)
Designed and manufactured in California USA
The Immerse Mk II is packed with eight versatile reverb effects:
W3T (Wet v3) — Our flagship reverb algorithm is smoother and more three-dimensional sounding than ever before. With adjustable pre-delay, it enhances what you play without covering it.
Plate – Bright and diffuse like a studio plate reverb.
Hall – The lush, open sound of a concert hall with adjustable modulation depth for achieving deep modulated tones.
Spring – The distinctive twerp of a tube-driven spring reverb. With adjustable modulation speed, it can achieve a vibrato-spring sound.
Sustain – A new algorithm built on the W3T reverb. This magical, versatile effect can be configured as a sustainer or infinite reverb.
Echo – Combining the W3T reverb with stereo echo.
Detune – Adds a detuned double of the dry signal with reverb. The blend control adjusts the amount of detune vs. detuned reverb.
Shimmer – Reminiscent of a synth pad that follows what your instrument plays, this effect combines the best qualities of our previous shimmers.
Effect Select
Mix, from 100% dry to 100% wet
Reverb Depth (+Echo Repeats)
Effect Dependent Control 1
Tone (Wet, Plate, Hall, Spring, Shimmer, Detune)
Echo Time
Hold Time (Sustain)
Effect Dependent Control 2
Pre-Delay (Wet, Plate)
Modulation (Hall, Spring, Sustain)
Reverb-to-effect Blend (Echo, Detune, Shimmer)
Electrical
Input level instrument / consumer line level
Input impedance 1 MΩ
Frequency response 20 Hz—30 kHz
Total harmonic distortion < 0.01%
*See User Guide for complete specifications.
Power
Input 9-12 V DC, 100 mA
Connector center-negative, 5.5 mm OD x 2.1 mm ID
Physical
Dimensions 2.6” x 4.6” x 1.9” / 63 mm x 115 mm x 46 mm
Weight 6.7 oz / 190 g
The Immerse Mk II raises the bar with eight rich stereo reverbs in one easy to use pedal. No user manual required. Experience studio-quality tone that can be used with instruments of all stripes.
High-quality buffered bypass, perfect for placing at the end of the signal chain
Trails switch
Kill Dry switch for parallel effect loops
Inputs/outputs can be used mono (#1) or stereo (#1 and #2)
Analog dry signal for low noise and zero latency
Small, pedalboard-friendly footprint
Requires standard 9V pedal power supply (not included)
Designed and manufactured in California USA
The Immerse Mk II is packed with eight versatile reverb effects:
W3T (Wet v3) — Our flagship reverb algorithm is smoother and more three-dimensional sounding than ever before. With adjustable pre-delay, it enhances what you play without covering it.
Plate – Bright and diffuse like a studio plate reverb.
Hall – The lush, open sound of a concert hall with adjustable modulation depth for achieving deep modulated tones.
Spring – The distinctive twerp of a tube-driven spring reverb. With adjustable modulation speed, it can achieve a vibrato-spring sound.
Sustain – A new algorithm built on the W3T reverb. This magical, versatile effect can be configured as a sustainer or infinite reverb.
Echo – Combining the W3T reverb with stereo echo.
Detune – Adds a detuned double of the dry signal with reverb. The blend control adjusts the amount of detune vs. detuned reverb.
Shimmer – Reminiscent of a synth pad that follows what your instrument plays, this effect combines the best qualities of our previous shimmers.
Effect Select
Mix, from 100% dry to 100% wet
Reverb Depth (+Echo Repeats)
Effect Dependent Control 1
Tone (Wet, Plate, Hall, Spring, Shimmer, Detune)
Echo Time
Hold Time (Sustain)
Effect Dependent Control 2
Pre-Delay (Wet, Plate)
Modulation (Hall, Spring, Sustain)
Reverb-to-effect Blend (Echo, Detune, Shimmer)
Electrical
Input level instrument / consumer line level
Input impedance 1 MΩ
Frequency response 20 Hz—30 kHz
Total harmonic distortion < 0.01%
*See User Guide for complete specifications.
Power
Input 9-12 V DC, 100 mA
Connector center-negative, 5.5 mm OD x 2.1 mm ID
Physical
Dimensions 2.6” x 4.6” x 1.9” / 63 mm x 115 mm x 46 mm
Weight 6.7 oz / 190 g